I have built a site to site VPN tunnel to a remote site. The connection tunnel is listed as UP on the interfaces. The issue is that when running a tracert to the remote site's switch is that it gets stuck at the remote Juniper.
Our network is 192.168.0.0 /24 and the default gateway is 192.168.0.2
The remote network is 192.168.4.0 /24 and the default gateway is 192.168.4.254. The switch that we are trying to ping is 192.168.4.253.
The tracert shows going through the 192.168.0.2, to the 192.168.254, and then getting stuck there. Is there something we should do to get the connection to 192.168.4.254 to the 192.168.4.253 only over the VPN tunnel?
Thank you guys =3
