Hello,
On my Sonic Wall's packet monitor, I keep seeing untagged frames coming in on my parent X0 interface.
Does anyone have any ideas about this?
I currently have 4 sub interfaces configured on X0, and one trunk port running from my switch to X0
The trunk config looks like this:
Name: gi1/0/1
Switchport: enable
Administrative Mode: general
Operational Mode: up
Access Mode VLAN: 71
Access Multicast TV VLAN: none
Trunking Native Mode VLAN: 4094 (Inactive)
Trunking VLANs Enabled: 70-73
2-69,74-4094 (Inactive)
General PVID: 71
General VLANs Enabled: 70-73
General Egress Tagged VLANs Enabled: 70-73
General Forbidden VLANs: none
General Ingress Filtering: enabled
General Acceptable Frame Type: all
General GVRP status: disabled
Customer Mode VLAN: none
Private-vlan promiscuous-association primary VLAN: none
Private-vlan promiscuous-association Secondary VLANs Enabled: none
Private-vlan host-association primary VLAN: none
Private-vlan host-association Secondary VLAN Enabled: none
DVA: disable
Classification rules:
Classification type Group ID VLAN ID
------------------- -------- -------
interface gigabitethernet1/0/1
switchport mode general
switchport general allowed vlan add 70-73 tagged
switchport access vlan 71
switchport general pvid 71
switchport trunk native vlan 4094
switchport trunk allowed vlan remove 1