I am trying to create two separate wireless networks, one for the public and one for our staff. The public users need to be counted by an Untangle server and will need to be on their own network separated from the staff network.
I have a Netgear gs716tv2 switch which is connected to the staff network in which I can create VLANS. This is the switch I also have my Ubiquity UniFi access points and untangle server connected to now. The wireless public users and the untangle server will be using the 192.168.10.x network and the staff will be using the 192.168.1.x network. The wireless access points have the staff network transmitting and working properly already and I have created the public wireless network on the same radios and am tagging them with VLAN ID 50. I need the VLAN 50 traffic to only go to the port where the Untangle server is connected. The 2nd network port of the Untangle server is connected to the Sonicwall port that has the 192.168.10.x network configured. All VLAN50 traffic should pass through the Untangle server and go out the Sonicwall.
So everything is configured in the Sonicwall, Untangle Server, and UniFi radios properly but I need help with setting up the VLANS on the switch to allow the VLAN50 traffic to only go to the port of the Untangle server while still allowing the normal (VLAN1) traffic coming from the wireless radios to stay separate from the VLAN50 network and still work on the same switch.
Thanks for any help!