Hi everyone!
It's my first time using a HP procurve 1910 managed Switch.
And im using it with an opensource firewall.
My network set up is this..
Firewall(192.168.1.1/22)
On my HP 1910 8G
Default VLAN - 1 Untagged Port 1,3,5,7
Admin VLAN (10.10.1.1/22) - 0010 - Tagged Port 1 - Untagged Port 2,4,6,8
The problem is when I plug my laptop into Port 2 (VLAN0010)
I DO get an IP on the 10.10.1.1/22 Range *BUT* no internet Connection. What configuration did I miss?