So the scenario is thus: I have a Site to Site IPsec tunnel and I have 2 machines that I am aware of out of 100 or so that cannot access the remote netowork. They cannot ping, tracert, nslookup, telnet, or RDP to any machine on the remote site. the rest of my machines can do all of that without any issues. These two machines are vastly different as well, one is running XP and the other Windows 7.All machines are using DHCP and I set both sides of the tunnel up myself so there are no set IP blocks. Here is the list of things I have tried:
Uninstalling and reinstalling tcp/ip, firewall is off, flushdns, static routing on the local machine, reinstalling nic drivers, winsock reset, safe mode with networking, etc
Just alittle more info about my network, all machines are all part of the same subnet and domain, they all use the same gateway and switches. I have several other tunnels set up with zero issues on any machine. My network is a 10.10..1.x and remote network is 192.168.16.x network.
I am not a networking guru but I am not a noobie either. I am stuck on this issue, any help or advice would be appreciated!