Ok guys,
I know I have a previous thread concerning VLANs on a Cisco 2901 router.
In the previous thread, I was creating sub-interfaces on the Gi 0/0 port
This router has a switch card installed with 4 ports Gi 0/0/0, 0/0/1, 0/0/2, 0/0/3
We currently are using 0/0/0 & 0/0/2
I am testing VLANs again, and I have these currently configured.
Vlan120 10.12.0.1/24
Vlan121 10.12.1.1/24
Vlan122 10.12.2.1/24
Vlan123 10.12.3.1/24
Vlan124 10.12.4.1/24
Vlan125 10.12.5.1/24
I have a PC in Vlan121 with IP 10.12.1.2/24 and a NAS in VLAN123 with IP 10.12.3.2/24
PC can ping NAS, and browse to the NAS through IE.
My problem is, the DHCP server assigns the IP to both clients, but can only ping the NAS.
I'm just trying to figure out why I can't get a response from the PC when pinging it from the DHCP server.
I have the VLANs configured on the switches as well, along with...