Hello everyone! I recently bought a Dual wan router for the sole purpose that i want to connect both floors into one network since they have their separate DSL modem( please refer to the picture ) . I was able to set up the 2 DSL connections on the new CISCO RV042 but then i started encountering problems:
The load balancers address is 192.168.0.1 and i had to change all the wireless routers address into 192.168.0.2 and 3 to avoid conflict and then turned them in AP's. And also i already changed the default gateway on the netwrok configuration on the server itself and the server can access the internet too
My problems :
With the first floor:
1.) There is no internet connetion on the work stations but the server seems to work fine . I observed that when i use the command ipconfig /all in CMD the default gateway is not the load balancer but the IP address of the DSL. So i experimented with it and i manually configured this workstation : I assigned an ip address , subnet , default gateway which is 192.168.0.1 and then DNS which is the IP of the server itself. and voila! there was an internet connection. I dont understand why does the RV042 give the IP address of the DSL instead of the its own IP address since that is the gateway.
With the second floor:
1.) No internet and unidentified network. Whatever i do, ipconfig /release and renew it keeps on displaying unidentified network that is why i cant make the workstations join the domain because it just displays unidentified network. BUT ... but when i try to manually access the server like for example a shared folder like \\mainserver1\shared , it is able to connect and it asks for credentials. It just i cant join the domain and also the internet is the same with IP addres displaying.
I hope someone can help me!! Thanks in advance!! i need asap :(