I'm trying to setup an ASA 5505 to trunk several VLAN's to a Dell PowerConnect 2824. I cannot get this working. I currently have a trunk on asa going to a esxi test server and it works fine. The only we I can get the vlan from the asa to the switch is to setup each switch port on the asa to a seperate vlan and then run a cat 5 from that port to the switch. I have set the incoming port to untagged (which I know you can't have multiple vlans untagged on one more. I have also set it as tagged. Any advise on this would be appreciated. I'm wondering if this is because it's only a Layer 2 and not a Layer 3 switch?
↧