I am trying to route traffic from my data network (HP 2900) to my voice network NetGear FS728TP. I have the two stacks connected and I can see both sides from the switch. However when I configure a work station to use the switch as the gateway it does not seem to be routing to either network. The switches are connected on port 21 my config is as follows.
Configuration Editor; Created on release #T.11.X1
hostname "HP-2900-24-SW2"
snmp-server location "Server Room"
module 3 type J90XXA
ip default-gateway 172.16.0.25
ip routing
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-24,A1-A4
ip address 172.16.0.58 255.255.0.0
ip igmp
exit
vlan 2
name "VLAN_VOICE"
ip address 192.168.2.250 255.255.255.0
exit
stack join 0019bb203600
spanning-tree
ip route 0.0.0.0 0.0.0.0 172.16.0.25
ip route 192.168.2.0 255.255.255.0 192.168.2.254
password manager
password operator
Let me know if you need any more information.
