Hello, I'm stumped....hard!!
I would be so grateful for some help from the community!
I've got an issue printing across an IPsec vpn site-to-site tunnel setup on my network.
Scenario:
Both sides have ASA 5505 firewalls. Both are on same firmware versions as well as ASDM versions. The tunnel is working flawlessly both ways for all protocols (icmp, http, rdp etc)
From remote office, employees are RDP'ing to terminal server on other end of tunnel. No problems what so ever in that regard. I have installed the printer to the terminal server via IP address. This went without issues as well.
The Issue:
When employees are logged on to the terminal server (from the remote office), they send a print job to the printer. This print job goes to the queue of the printer on the terminal server and disappears from the queue as if the job went through without issue. However, the job never prints to the printer at the remote office. No error messages or anything.
Closing thoughts:
I've tried SSH'ing and Telnet'ing from the corporate office to the remote printer across the tunnel on port 9100 (for RAW printing data) and i successfully connect without any errors.
I've read through quite a few posts on spiceworks with other members having similar issues but could find no resolution.