PC has a static IP, subnet, etc... however in subnet says 0.0.0.0 in ipconfig?
I have a PC that will not access the internet although I can remote into it. It has a static IP, subnet, etc...., but if I run ipconfig from a command prompt, the subnet shows 0.0.0.0? Everything else...
View ArticleT1 Packet Loss Problems
I have a provider that will go unamed that can't seem to resolve this issue... The problem is that whenever traffic is passed over the T1 circuit, lots of packets are dropped - usually around 30% but...
View ArticleSwitch question??
This type switch http://www.dlink.com/us/en/support/product/des-3010fa-managed-8-port-10-100-switch-plus-1-gigabit-port-plus-1-100base-fx-mmf-port Is a 10/100 switch with one gb port...explain this to...
View ArticleNetgear GSM7328 and Palo Alto PA2020 Errors
Hi, We have just moved our Internet connection from our LEA to Virgin Media but have encountered a problem. When we connect our network to Virgin Media's co-managed firewall (which is on site), the...
View ArticleWhat Router/Switch/Access Point should i use
Got a buddy who owns a gaming center/lan center...He has approx. 20 Xbox 360s all online and his work computers...plus who ever comes in to use the wifi. Just wondering what hardware would be the best...
View ArticleSegmenting a Network
One of my clients has a 192.168.1.1 network. They have asked me to add a new router to segment some registers off of the main network, however they need to connect to a server in the 192.168.1.1 network.
View ArticleNeed Transparent PPPOE Bridge for use with Fibre NOT ADSL
Hi All, Had 100mb fibre installed last year, never really got more than 50mb out of it and I've finally put my finger on the cause I have a Sonicwall TZ100 as my primary firewall connected to the...
View ArticleSwitch question??
If you are switching out a switch and it is the exact same model as the one your swictching out and the only configured ports are 5 vlan ports... Is it safe to say that I dont need to remember where...
View ArticleSwitch Question??
I have a dlink 8 port managed switch with a G1 link port...this is ithttp://www.dlink.com/-/media/Business_Products/DES/DES%203010FA/manual/DES%203010FA_Manual_EN_US.pdf Anyway I needed a bigger...
View ArticleConfigure Sonicwall Virtual Interface and Hp procurve Switch
I have a issue with configuring gust vlan in My Procurve switch Scenario. I am using Sonicwall as my firewall on X0 interface i have configured 172.18.4.254/24 working fine. and i have created virtual...
View ArticleSitting up 2 network cards + firewall on 1 server ?
Hi Guys, My name is Michael and im new to the spiceworks community! I found Spiceworks by pure luck and i must say im really impressed with all the features and support. wish more things in life where...
View ArticlePort-Channel port in standalone mode
Have a team of two NICs on my Server 2012 host and one of them displays the 'Faulted LACP Negotiation' error. The switch is a C3560 and the etherchannel sum shows that it's in a stand- alone state...
View ArticleWhich advantage will I have If i get Network+ certified?
Which advantage will I have If i get Network+ certified? I want to be a real IT pro
View Articlerouting/arp cache problems with replacement netgear swtich
Hi, I have replaced a netgear FS728TP POE switch with a bigger FS752TP POE switch, however upon replugging IP phones back into it, they are not all registering with the phone system, only a handful...
View ArticleInternet Connectivity in Shanghai
We've got a small office in Shanghai currently on a Chinatelecom DSL connection - we'd like them to be able to connect into our UK offices (OWA / Remote Desktop / Citrix etc.) but the current...
View ArticleWhat Cords Go Where!?
So, I've inherited the network room from my predecessor...who is now my predecessor for a reason. We have two patch panels, and three routers. I have no idea where any of the cords on the patch panels...
View ArticleMeraki MX80 slow on fast DSL lines
HI, We installed an MX80 on a 60MBit line and are only getting 30Mbit Meraki say its a known problem with MX80 and MX90 and are working on a solution Anybody had these working on high speed lines?...
View ArticlePatch Panels Good or Bad Idea
I was planning to separate voice from data on two patch panels in two racks. There's no voip in the near future no POE. 40RU Racks Rack two would have 6 X 48 panels (all voice) With voice modules...
View ArticleMPLS\Leased Line and EFM
Hi. I am looking at replacing our MPLS\Leased Line(firbe) With BT currently . Will either stay with them or move to Exponential-E or Zen Internet. Anyone have recent dealings with either company. good...
View Article