HP ProCurve 3500YL : Create VLAN for guest (Internet Browsing)
Let's tell you the full story.I have three desk in the office where people have two computer, one for internal work and second one for guest access (internet browsing only). Those three desks only have...
View ArticleOut of IP Addresses
Bear with me, I am a newbie to this kind of project...We are very close to running out of IP addresses in our company - at one site. We have used up 192.168.0.X and 192.168.1.X ranges. We also hard...
View ArticleNetwork Configuration help.
Okay, looking for some help here. We have made some adjustments to our network and I am at a loss. I have 3 servers which are the only things that have connectivity and nothing to any of my network...
View ArticleNeed to Add a NAT Route
I have this very specialized PC that requires this very specialized setup. Please see if you can help me out.The PC has two NICs. One connects to a Verzion network, let's say 64.xx.yy.zz That part...
View ArticleReplace Router on the stick
Configuration that I need to replace is:Cisco 1841 (Connected to the internet via ISP (ethernet), Point to point via 2 T1 to another location, backup vpn to another 1841 if PTP fails, Eigrp routing,...
View ArticleBroadband allocation for a managed office
Hi all,Just wondering if you could advise me of the recommended configuration for this setup.Just taken over a managed office with 20 businesses. I have a comms room with a 100mb bearer leased line...
View ArticleNetwork question
When I started at my current job, the network was already up and running. As I've started learning more about networking and Cisco, I've been wondering why it was setup like it was. We were only 5...
View ArticleVPN Solution, Cheap, Reliable, User Friendly?
Need a VPN solution for I'd say MAX 5-20 connections/users.I have been poking around with OpenVPN and OpenVPN access server, but they both seem to be challenging for me to pickup, plus I suck with...
View ArticleAuthentication without login privledges
I am not sure if this is the right group to post this to but what I would like to do is create a set of credentials that I can give out to users that would allow them to install updates, printers,...
View ArticleNew install of Sonicwall TZ215 & Netgear GS724Tv3
We just deployed a Sonicwall TZ 215 and upgraded our switch to the netgear 24 port GS724Tv3. My sonicwall was configured by a certified tech from firewalls.com. Everything seems to be working on that...
View Articlenot auto negotiating 1GB full
I have one HP 8570w out of two that we have been having issues with the NIC for quite a while. Randomly the user comes into work and has no LAN/WAN access until I come disable and re enable the wired...
View Articlefirewall situated in LAN instead of on the perimeter of network ie WAN and LAN
hi all, is it possible to put a firewall (pfsense) on any of the VLAN subnets instead of it being inbetween the WAN/LANi have a netgear router atm as my gateway between my WAN/LAN and i want to be able...
View ArticleHA for a small dental office
I will possibly be setting up a small network for a family member this summer. Right now I am in the planning stage of determining the best setup for this network. The office is a small dental...
View ArticleGPO Multiple servers
I have GPO on a W2003 AD server and we are adding some W7 pc's in the mix. I found where I can load up GPO on a new W2012 R2 server. Will this conflict with the GPO on the W2003 server? Can they run...
View ArticleComputers With two nic(s) and internet traffic.
we have four computers that have to use two nics for a specialized software, the problem is occasionally internet traffic will go over the second nic. normally you could stop this by removing the...
View ArticleDomain Rename/Consolidation Question
After recently experiencing a power outage that caused a slew of technical issues (even though we are on a battery backup system and gently powered down all servers, I'll add) I am looking to finally...
View ArticleIs there any way to segregate AD and non-AD devices in DHCP?
Is there an easy way to segregate domain and non-domain devices, essentially having them pull from different ranges in DHCP? What I want is, to have domain (workstations, laptops, printers) devices...
View ArticleOne User Experience Extremely Slow Connection to VPN
Hello everyone I have been scouring the internet for weeks trying to find a solution to this problem but have been unsuccessful so hopefully someone out there will be able to give me a hand. Let me...
View ArticleH3C S5500, redirect single vlan to different router (internet only)
Hey Guys, We are trying to set up a guest network on our Cisco AP 1242AG. We currently have a corporate on the access points. As far as I am aware we can have a guest network on seperate vlan on these....
View ArticleUse OpenVPN or Similar?
Hi Folks,I have been attempting to get an OpenVPN virtual appliance setup over the last few days. I am definitely NOT a linux person. At all. I have reached a high point of frustration over getting...
View Article